Brief Introduction

CDM2RA25-30Z

SMC's cylinder CDM2RA25-30Z Key ParametersType: Compact (thin) cylinder (single-rod, double-acting; square compact design balancing thrust output and space utilization; part of SMC's CQ2 series base model);Bore Diameter: 63mm (corresponding to "63" in the model; output thrust is approximately 1583N at 0.5MPa, suitable for medium-to-heavy load, short-distance actuation requirements);Stroke: 100mm (corresponding to "100" in the model; medium-short stroke balance between actuation distance and response speed);Built-in Magnetic Ring: Yes (marked by "D"; can be used with magnetic switches for real-time piston position detection to meet precise automation control needs);Port Thread: Rc 1/4 (standard medium-flow port suitable for medium-to-heavy load pneumatic circuits, ensuring stable air supply);Pressure Range: 0.1–1.0MPa (pressure resistance: 1.5MPa; compatible with conventional pneumatic system pressures, balancing safety and application suitability);Temperature Range: -10~60℃ (stable operation in non-freezing environments; avoid high temperatures to prevent seal aging and failure);Piston Speed: 50-500mm/s (a flow control valve is required to prevent impact from high-speed movement in medium-short strokes and protect the workpiece and cylinder);Cushioning Method: None (additional cushioning components must be installed based on load characteristics to avoid end-of-stroke impact);Mounting Method: "A" denotes tapped holes on both ends (standard tapped holes on front and rear ends for direct mounting or use with accessories, adapting to multi-directional installation requirements);Additional Features: External rod-end thread (marked by "M") for easy connection to tooling or load attachments; supports 4-sided magnetic switch installation (marked by "Z") for highly flexible position detection.ApplicationsSuitable for automated scenarios with limited installation space requiring medium-to-heavy load actuation, especially where position detection is needed, such as:Automated fixture actuation (e.g., clamping and positioning of medium-sized workpieces, auxiliary opening/closing of heavy-duty tooling in production lines);Stamping and pressing operations (e.g., stamping and forming of metal components, pressing and positioning of thick plates);Equipment mechanism linkage (e.g., driving capping mechanisms in packaging equipment, workpiece clamping in machine tools);Commonly used in automotive parts assembly lines, medium-sized packaging machinery, and electronic device manufacturing as a compact medium-to-heavy load actuation